จิ้มปุ่ม reset ?? หรือครับ ผมแค่อัพเดต firmware เฉยๆเท่านั้นเองครับ
รบกวนบอกขั้นตอนหน่อยนะครับ
วิธีทำ
1.) กดที่สวิทช์ Restore ของเครื่อง ค้างไว้โดยหาอะไรจิ้มด้านหลัง แล้วเปิดเครื่อง
2) รอประมาณ 20 วินาที จนหน้าจอหน้าจอการกู้คืน ขึ้นมา
3). ใช้รีโมท ตอบ yes แล้วรอประมาณ 3 นาที
4). หลังจากเสร็จสิ้นการกู้คืนก็จะเริ่มต้นใหม่โดยอัตโนมัติ
แล้วใช้ FW ตัวนี้
S1A,S7A recover tool, ver:1.09.020 (2011-01-1 update)
ลิงค์
ftp://220.231.142.130/Firmware/S1AS7A_FW_20101231/S1AS7A_FW_1.09.020_REPAIR.rarจากนั้น ลง เฟิร์มแวร์ S7A ตัวที่ต้องการใช้อีกครั้ง อีกครั้ง
แต่ปกติแล้ว จะทำการ recovery เมื่อมัน boot ไม่ขึ้น ค้างอยู่หน้าจอ Logo เสียมากกว่าแต่มันก็จะมี FW บางตัวที่จะต้องทำแบบวิธี recover tool
เช่น
ver:1.09.025 , ver:1.09.027หน้าดาวน์โหลดจะขึ้นเตือนตัวสีแดงไว้เลยว่า
Important notice:
1, Only recover tool available for this updating!!!
2, User must apply recovery tool for this times to upgrade your S1A / S7A player.
Recover tool usage:
1, At first, uncompress the packed file, copy the 'flashbin' folder to USB stick root. please make sure to copy the whole of folder, it is better not to put irrelevant file in this USB stick, and make sure there is 256M rest space in USB stick.
2, insert USB stick to USB port.
3, Power-on the device, as soon as the booting screen occur,
press leftarrow button of remoter controller continually(press-down & press-up,about 10 seconds, then,stop pressing), untill screen display dailog menu,then choise 'Yes' and press 'OK' button, then the system start to upgrading ...
4, System recover takes about 3minutes, pls wait patiently! During recovery, pls don't power-off the player, otherwise, that will result in storage broken and need to send back to factory for amendment.
5, Fixing work done successfully, will auto-reboot.
6, After rebooting, device will work fine.