คัดลอกมาจากเวปของ Anthem ครับ.
MRX x10 software installation
1. Copy the extracted .fw file to a USB stick, root directory. Very important: Make sure there is only ONE .fw file in the root directory and that it is the latest for your model. US=120V, EU=240V, CN=240V.
2. Connect USB stick to MRX rear panel.
3. Turn the unit on. Once it has completed startup, long-press the Select button on the front panel (8 sec) until installation starts. Installation can also be initiated via the setup menu. Installation takes about 10 minutes. Very important: Do not interfere while software is being installed. The unit will turn on and off a few times and power on to normal display when installation is complete.
If software installation does not start and the MRX AC cord needs to be disconnected/reconnected to make unit operable again, try another USB stick, preferably containing fewer files.