Latest firmware
5i-A AD firmware version 20120620- mandatory upgrade version ( long file name support, audio and subtitles menu list )
Please click here to download : 5i-A AD firmware 20120620 mandatory upgrade version ( long file name support, audio and subtitles menu list )
The main improvement list:
1: support for long file name file .
2: solve the fast-forward drag and Blu-ray menu conflict. In the fast forward function, must press the OK button, according to the upper left corner of the fast-forward operation instructions.
3: play Blu-ray movies, when you press the keys subtitles / track key, caption or tracks will be displayed in list form on the screen. Simplified Chinese in red font display. If you want to switch the subtitles or track, please continue to press the subtitles or track key, do not press the OK button, menu will disappear.
4: video file list, increase the image preview function.
This firmware is mandatory upgrade version, cannot use the settings menu approach to upgrade, you must use " mandatory upgrade " to upgrade your machine.
mandatory upgrade steps are as follows:
1: download the file and unzip, you get forced to upgrade software, file named" uNAND.img"
2: copy the file uNAND.img into the U disk root directory, plugged into the rear part of machine to USB interface.
3: please put the machine rear upgrade compulsively switch to RESET position, turn on the power switch, indicator light on, wait 10-15 minutes.
4: turn off the power switch. put the mandatory upgrade switch to Normal position.
5: turn on the power switch, using a remote control device to start the machine, to complete the mandatory upgrade .
6: after the upgrade is complete, the first start time than usual to long, about 1 minutes.
A few users upgrade failed, because the U disk quality problems. Please use the genuine authentic U disk, FAT32 format. If you still cannot upgrade, please try to get U disk formatted with FAT.
Strongly recommend the use of LEXAR 8G U disk.
During the upgrade, U disk instructions on the exhibit of lanterns shining. Light twenty seconds, twenty seconds to stop several times, alternating. If the U panel lights long time no response, or keep flashing, upgrade will fail, please replace U disk to upgrade.
Note:
mandatory upgrade switch, usually must be in the Normal position. After the upgrade is complete in the open before power, must be set back to the Normal position, otherwise it will damage the firmware, but again to upgrade
